Q: Why do the radio buttons not work on the grading tab?
A: The radio buttons have no effect if the symbol being analyzed has only one component.
The radio buttons are for grading composite symbols that have both 1D & 2D components. They allow the user to choose to show results for either the 1D
portion of the symbol, or the 2D portion. The example below shows a GS1 Databar with CC-A on top. Each component is graded. You can switch between the components by selecting (clicking) the desired radio button to view the parameters for each.
Below the 1D/2D radio button selection, is an information box that displays the decoded data. This data does not contain any stop, start, or control (non-printable) characters. Check digits may or may not be displayed depending on the symbology. For example, Code 128 mandates that they not be transmitted. The software always displays the check digit for symbologies that make the transmission of check digits optional. To see special characters or check digits, refer to the Structure tab.
Date/Revision History
First review 4/21/2025 V1.0
Author:
Brian Keenan, Technical Support Specialist
References
84-9310001-02 LVS-95XX Series Barcode Quality Station Operations Manual
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article